using the extractor fan

● Filter management menu:

Conditions required to enter the menu:

The COOKING ZONES and EXTRACTOR must all be powered ; The EGG TIMER must be Off. If these conditions are not respected, by performing the access procedure, the display (7a+7b) will indicate and it will not be possible to continue further.

To access the menu and view the status of the filters:

After complying with the input requirements indicated above, press key (12), then press (8a) and (8b) simultaneously for 4 seconds.

At this point we will find ourselves in the Filter management menu.

By default, the display (7a+7b) will show the status of the GREASE FILTER. To switch to viewing the status of the ODOUR FILTER, press (8a) Each time this key is pressed, the display switches from one filter to another, consecutively. Below is a table of filter statuses.

*When the filter saturation indicator is ACTIVE the display (7b) will show the status of the filter with a value from (maximum efficiency) to (saturated filter).

To turn the filter saturation indicator on or off:

After selecting one of the two filters, press (8b); with each press, the display switches from one state to another consecutively.

Note: Deactivating the filter and then reactivating it in the same session, the value of the filter state remains unchanged from before deactivation.

Exiting the menu after having deactivated the filter, when the filter is reactivated the filter saturation value will restart from .

To exit the Menu:

To exit the Menu, press any key EXCEPT key (8a) and (8b) or wait 8 seconds without touching any other keys.