using the hob

● Power Limitation

The Power Limitation function allows the product to be used while limiting its maximum absorption, adjusting the absorbed power in all active cooking zones, ensuring that the total absorbed power of the hob does not exceed the set maximum absorption level.

The Power Limitation management menu is located inside the Parameter management menu.

To enter the parameter management menu:

Disconnect the hob from the power supply, wait a few seconds and reconnect the hob to the power supply. UNLOCK the hob by holding down the key (11) for a few seconds; subsequently, press the keys (12) + (14) simultaneously for a few seconds until the scroll bar (5) lights up. Slide your finger along the entire bar (5) from left to right. The two displays (3-FL) and (3-FR) will light up.

The Display (3-FL) indicates the parameter being modified.

Display (3-FR) indicates the set value.

To go to the Power Limitation management menu:

By default, accessing the parameters menu, the display (3-FL) alternately shows the values and ; press the key (9-FL) several times until the display (3-FL) shows the values and alternately. ( and = Power Limitation management menu).

Set Power limitation value:

press the key (9-FR) to select the desired value from the three available, see table below:

Saving settings:

To save the selected settings, press the key (1)