Electrical connection

The mains power supply must correspond to the rating indicated on the plate situated inside the hood.

If provided with a plug connect the hood to a socket in compliance with current regulations and positioned in an accessible area, after installation.

If it not fitted with a plug (direct mains connection) or if the plug is not located in an accessible area, after installation, apply a double pole switch in accordance with standards which assures the complete disconnection of the mains under conditions relating to over-current category III, in accordance with installation instructions.

CAUTION

caution

Check the main power cable

Check the correct installation of the main power cable, if it is not suitable or not correctly installed, contact technical assistance and replace it.
After correct installation, reconnect the hood circuit to the main power supply and check that it is working properly.