Installation

Use the fixing screws supplied with the product only if they are suitable for the surface, otherwise purchase the correct type. Check that there is no (for transport reasons) accompanying material inside the product (e.g. envelopes with screws, warranties, etc.); if there is, it must be removed and stored. Warning: Failure to install screws and fasteners in accordance with these instructions may lead to electrical hazards. The evacuation pipe is not supplied and must be purchased. The diameter of the evacuation pipe must be equivalent to the diameter of the connection ring. When installing the product on the hob, observe the height indicated in the drawings. The minimum distance between the support surface of the receptacles on the cooking device and the lowest part of the cooker hood must be no less than 50cm in the case of electric cookers and 65cm in the case of gas or combi cookers. If the installation instructions of the gas cooker specify a greater distance, this must be taken into account